Original Engine Degreaser

EASILY REMOVE THE TOUGHEST OIL AND GREASE
Specially formulated to deliver a heavy duty clean for the hardest working engines.

Clean engines run cooler, look better & last longer! GUNK® Original degreasing formula for cars, trucks, power mowers, marine, heavy-duty rigs, farm equipment and tractors as well as industrial machinery.

Directions:
Do not start your engine after you have applied GUNK® Original until entire engine is properly rinsed. Rinsing is necessary to properly clean engine and to avoid potential fire hazard. Safeguard our environment. Use the minimum amount of rinse water necessary and see disposal statement mentioned on the product.
1. Engine must be off and cool.
2. Care must be taken with all under-hood wiring and electronic sensors or components. Cover any open carburetor or intake system openings. Cover exposed electronic components (uncovered cracked, frayed wires or engine computer units can short circuit).
3. Shake well and apply generously to dry engine. Make sure to cover all dirty and greasy surface areas with GUNK® Original. Wipe over spray from exterior body surfaces with a wet cloth quickly to avoid de-waxing or streaking paint.
4. Allow GUNK® Original to soak for 10 to 15 minutes. Brush unusually heavy deposits to break up grease and dirt.
5. Rinse all areas with a fine stream of waters from top down. Minimize rinse water in areas that can cause performance problems (electronics and intakes).
6. When complete, remove added coverings and replace any removed parts. Start engine and idle 15 minutes to assure complete drying.